Pipe Benders

Manufacturer: Pines
New/Used: Used
Price: $65,000 F.O.B. Longview, Texas

Year 1995

Machine Specifications:
L.H. (Counter-Clockwise Rotation)
Hydraulic Mandrel Extractor
Push Button Control
Max. Radius = 12"
Max. Bend Angle = 180 Degrees + Overbend
Max. Tube Length Over Mandrel = 7'- 5"
Hydraulic Reservoir Capacity = 55 Gallons
Machine Weight = Approx. 4600 lbs.
Machine Length = Approx. 10'-6"
Machine Width = Approx. 48"
Machine Height = Approx 48"

Bending Capacity:
Round Tubing Mild Steel = 3"x .109 wall
Round Tubing Stainless Steel = 3"x .065 wall
Steel Pipe = 2" Schedule 80
Square Tubing Mild Steel = 2-1/2" x .083 wall
Rect. Tubing Mild Steel E-Plane = 1-1/2" x 3" x .148 wall
Rect. Tubing Mild Steel H-Plane = 1-1/2" x 2-1/2" x .120 wall
Round Bar Mild Steel = 1-7/8"
Square Bar Mild Steel = 1-11/16"

Tooling Included:
Installed Complete Die Set for 3" OD x .065 Wall 6" Radius with Mandrel
(1) Complete 1.9" Die Set without Mandrel
(1) 6" x 3" Bend Die
(1) 3" Clamp Die
(1) 3" Pressure Die
(1) Insertable 3" Wiper Die
(1) 3" Mandrel

Manufacturer: Horn
New/Used: Used
Price: $100,000 F.O.B Longview, Texas

Specifications:
Model HMT #3
Year 2002

Capacity:
Non-Ferrous Tubing YP to 25,000 psi 4" OD x .187" wall
Steel Tubing YP to 25,000 psi 4" OD x .109" wall
Stainless Steel Tubing YP to 60,000 psi 4" X .083" wall
Square Steel Tubing 2-1/2" x 2-1/2" x .187 wall
Rectangle Steel Tube 1-1/2" x 3 x .250 wall
SCH 80 Extra Heavy Pipe 3"

Max Radius 15" Clr
Max Tube Over Mandrel STD 144"
Max Bend Degree 190°
B Axis Travel 360°
Y Axis Travel 120"

Speed:
Bend Arm 6 rpm
B Axis Speed 30 rpm
Y Axis Speed 2800 IPM

Dimensions 8'W x 18'L x 6'H
Weight 17,000 Lbs
Rotation Counter Clockwise

Equipped With:
Automatic plane of bend carriage with digital servo motors
Adjustable overhead tie bar to pressure die arm
Drop away swing arm with clamp holder
Steel slides with ground steel and new bronze alloy wear strips
Direct activated pressure die closure
Pressure die assist with independent pump
Programmable pressure control of pressure die assist
4" Hardinge collet chuck with a set of pads
Wiper Die base with holder
Parker Hydraulic cylinders, valves, filters, hoses, and pumps
Hydraulic cooling system with digital temp readout and over temp alerts
Main drive Motor-40 Hp, 480 VAC
Parker servo valve for bend arm
Reverse acting hydraulic mandrel extractor with proximity position sensors
Bijur lube system, lines, hoses, meter units, and fittings
Safety floor mats
Hollow mandrel rod and auto lube system
Operation manual

Controls:
Adaptive motion control
PC based control system
Memory storage of unlimited part programs
All electrical components

Tooling: (All for 3" O.D. Tube)
(2) 6" x 3" Bend Dies
(1) 3" Insertable Wiper Die
(2) 3" Recut Wiper Dies
(1) 3" Inserted Clamp Die
(8) New Mandrel Balls