Engine Lathes

image33

Manufacturer: Daewoo
New/Used: Used
Price: $17,450 F.O.B, Longview, Texas

SPECIFICATIONS:

Height of Center 10"
Swing Over Bed 20"
Swing Over Carriage 13"
Main Spindle:
Type of Nose D1-8
Bore 3"
Taper of Center MT No. 5
Taper of Spindle 1/20
Spindle Speeds:
Steps 12
Ranges 25 – 1500 rpm
Carriage:
Cross Slide Travel 10-1/2"
Tool Slide Travel 6"
Center Distance 78 inches
Feeds:
Changes 64
Sliding 0.0008-0.0236" / rev
Surfacing 0.0008-0.0118" / rev
Threads:
Metric 0.5 – 7mm Pitch
Whitworth 56 – 4 T.P.I.
Module 0.25 – 3.5Md
DP 112 – 8DP
Tail Stock:
Center MT No. 5
Travel 8"

Bed:
Width 16-1/2"
Length 90-1/2/110/130 inch
Motor:
Main Motor, 220/440/3/60 AC 10 HP
Coolant Pump, 220/440/3/60 AC ¼ HP
Floor Space required 40 x 140 inch
Approximate Weight 5770 Lbs.

FEATURES:
2 Steady Rests
1 Drill Chuck, ½"
6 Jaw Chuck, 12"
Aloris Tool Post with Holders, 7 pieces set
Work light

image34

Manufacturer: Victor
Item Number: 2252
New/Used: Used
Price: $7,000.00

SPECIFICATIONS:
Serial Number - 461079
Swing Over Bed - 16-1/8"
Swing Over Cross Slide - 10-1/4"
Swing In Gap - 23"
Distance Between Centers - 40"
Spindle Bore - 2-1/32""
Spindle Nose - Camlock D1-6"
Spindle Speeds - (16) 33 to 2000 RPM
Inch Threads - 4 to 56
Metric Threads - .45 to 7 mm
Longitudinal Feeds - .0033" - .0455"/Rev
Cross Feeds - .0028" - .0387"/Rev
Tailstock Spindle Diameter - 2"
Tailstock Taper - No. 4 M.T.
Tailstock Quill Travel - 4-11/16"

EQUIPPED WITH:
7-1/2 HP Main Spindle Motor
Inch/Metric Threading
8" 3-Jaw Chuck
Thread Dial
Foot Brake
Full Length Splash Guard

Approximate Weight: 3600 Lbs.

image35

Manufacturer: Hardinge
Item Number: 2231
New/Used: Used
Price: $5,500.00 F.O.B. Longview, TX

Model: DV59
S/N: 7950
New (Approx.): 1962
Bar Capacity: 1 -1/16"
Swing Over Bed: 9"
Swing Over Cross Slide: 4.5"
Distance of Spindle to Turret: 3" – 18"
Spindle Hardinge Taper
Spindle Speeds (Variable): 230-1300 Low, 460 – 2500 High
Electrics: 230V/3PH/60HZ, 1 H, Control Voltage 110/1/60

Equipped With:
Variable Speed Motor
6 Position Turret
Coolant
Cross Slide Tool Holder
Collet Set 1/8 – 1" 15 Pcs. (NEW) 5C
Box Turning Tool
Two Drill Chucks
Coolant Pump (TMSI will order one for this machine and install before shipment)